Yoo Digital Home i.wip 2000 Notice D'utilisation page 22

DESCRIPtIoNS foR REMotE CoNtRoLLER BUttoNS _
hoW to S Et S y N ChRoN I zAtI oN of th E R E M ot E C o N t Ro LL ER
you do not have to set synchronization for the remote controller supplied with
the product.
Important
If you need to buy a new remote controller due to loss of the existing remote
controller or other reasons, you need to synchronize the robot cleaner with the
new remote controller.
Important
1. turn off the power switch at the side of the main body.
2. While pressing the power switch at the upper part of the main body, turn on the power switch
at the side of the main body.
4. While pressing the oK button from the re-
mote controller, re-insert the battery in.
• the oK button of the remote controller will
turn on and then off in red and blue in turn.
• the synchronization will be completed in a
few seconds.
• If the main body is 3 meters or more distant
from the remote controller, the synchroniza-
tion will fail.
5. turn off and then on the power switch at the side of the main body.
6. Pull out and then re-insert the battery of the remote controller.
• the synchronization will be completed.
22 USER'S MANUAL I.WIP 2000
• the display of the main body will start blinking for syn-
chronization.
3. Pull out one battery of the remote controller.
__________________________________________________________