________________________________________________
S E t t I Ng R ES ERVAtI o N
you can set the product to perform cleaning at a desired time for each day of the week.
Important
01. Press the [RESERVE] button.
•
At the main body of the robot cleaner, the'Reervation number'starts blinking (The numbers 1-7
mean Monday - Sunday).
•
Select one with the"Up"and"Down"direction keys and press the"Right"direction key to go to a
next procedure.
02. When the time setup is completed, press the [OK/MANUAL].
•
Set [Start time : End time]
•
When [Start time] is reset changed, the End time will be automatically set to beafter two hours.
•
If the cleaning is completed before the End time, the robot will go on working until the set End time
•
When you press the [Reservation setup] button, the reservation setup will exit without the next
stage appearing.
03. Repeat the steps 01-02 to set the time for each day of the week.
•
For any date requiring no reservation, you can set the time as [00:00].
04. After all the settings for the day of the week are completed or if you want to go out of
the setup mode, press the [RESERVE] button.
__________________________________________________________
At first, make "Set the current time". With no time set, reserved setup will not
work correctly.
the reservation is available only with the remote controller.
If the battery is being charged at a reserved time, the reserved cleaning will be
executed after the charging.
once the battery is discharged, the system time will be initialized.
In this case, reserved cleaning
may not be executed; you need
to reset the time.
If the robot cleaner is working,
press the [START/STOP] button
to stop it.
USER'S MANUAL I.WIP 2000 33
EN