Yoo Digital Home i.wip 2000 Notice D'utilisation page 47

S yS t E M E R Ro R C o D E S L I S t ________________
Important
[E01] Reason
Measures
[E02] Reason
Measures
[E03] Reason
Measures
[E06] Reason
Measures
[E07] Reason
Measures
[E08] Reason
Measures
[E09] Reason
Measures
[E10] Reason
Measures
[E11] Reason
Measures
[E12] Reason
Measures
[E13] Reason
Measures
[E15] Reason
Measures
___________________________________________________________ USER'S MANUAL I.WIP 2000 47
If the product stops working with error codes displayed, you can resume the ope-
ration with the [POWER] button.
If you tried following the measures given below, please contact our local service
the announcement for faulty situations will be heard for the initial one time.
the battery is discharged and it cannot work.
Charge the product manually.
Product operation is tried with the main body connected with the
adapter.
Disconnect the adapter from the main body before the operation.
Product operation is tried without the dust box inserted.
Insert the dust box.
Both the wheels are lifted.
Place the robot cleaner on the floor or lift it to another site.
Either or both the wheels are found to have overload.
Lift the robot cleaner to another site.
the air inhalation fan is found to have overload.
Remove foreign substances from the air inhalation holes. Remove dust
from the dust box.
the main brush fan is found to have overload (over a reference level).
Clean foreign substances from the main brush.
the side brush fan is found to have overload (over a reference level).
Lift the robot cleaner to another site.
the product cannot normally move due to obstacles.
Lift the robot cleaner to another site.
too many bumper collisions are successively detected during move
(over a reference level).
Lift the robot cleaner to another site.
the product detects risks of fall successively (over a reference level).
Lift the robot cleaner to another site.
other errors
Please contact our service center.
EN