Interior View - Klarstein FROSTIK Mode D'emploi

Water drain
The drain pan and drain hose must be fitted before commissioning. The drain hose
is not included in the scope of delivery. You can purchase a suitable drain hose
in the trade to meet your specific needs. Follow the steps below to assemble the
drain pan and drain hose:
1. Pull the housing forward
2. Screw the drain tray to the corners of the enclosure with 2 screws
3. Connect the drain hose to the outlet at the bottom of the drain tray.
4. Push the housing back into its original position.
Screws
Drain tray

Interior view

To achieve the highest cooling efficiency, the air conditioner excretes water
through the condenser coil. If the spraying noise bothers you, you can pull the
plug out of the housing to reduce the noise, but this also results in a small loss of
performance.
Drain hose
Exterior view
EN
47