Control Panel On The Appliance - Klarstein FROSTIK Mode D'emploi

EN
40

CONTROL PANEL ON THE APPLIANCE

If the remote control is not available, open the control panel on the unit and make
manual entries.
On/Off: When you press
this key, the unit goes into
1
operation and goes off when
you press the same key again.
Swing mode: Activates the
2
swing movement.
3 Fan speed
Temperature settingand
press to increase or decrease
4
the set temperature. The
adjustable range is 16-30°C.
Setting the automatic timer:
(timer). Press
timer. You can set the timer in
4
30-minute steps in a range of 1
to 10 hours, or in hourly steps in
a range of over 10 hours.
5 Signal receiver
Operating mode: Here you
select the operating mode
6
(automatic, cooling mode, fan,
dehumidification mode).
Filter: This function reminds
you to clean the air filter
Maintenance and cleaning The
7
LED lights up after 250 hours of
operation. Press this button to
reset the warning message.
to set the