Time Zone Setting - Explore Scientific RDC3006 Mode D'emploi

crease 1 unit (when setting minute, second
will reset to 0). Press and hold the [ ] but-
ton, the figures will increase rapidly.
4. Press [ ] button once, the figure will de-
crease 1 unit (when setting minute, second
will reset to 0). Press and hold the [ ] but-
ton, the figures will decrease rapidly.
5. Press [ ] button to confirm setting and
enter to next parameter.
6. Sequence of setting: Time Zone  12/24 Hr
format  Hour  Minute  Year  Calen-
dar Mode (day-month/month-day)  Month
 Day  Weekday Language  °C/°F 
Exit
7. If there is no action in 20 seconds, the setting
will be saved and will exit the setting mode.
LANGUAGE
The Language options are: English (E), German
(D)  French (F)  Italian (I)  Spanish (S)

TIME ZONE SETTING

To set a different time zone, proceed as follows:
1. Press and hold [
and date setting.
2. The Time zone offset setting will flash.
3. Press the [ ] button to increase or
[ ] button to decrease the Time zone off-
set.
°C/°F SETTING
1. Press and hold [
and date setting.
2. Press [ ] button several times until the
display shows °C/°F.
3. Press the [ ] or [ ] button to switch Cel-
sius (°C) / Fahrenheit (°F).
ALARM
SETTING/ADJUSTING DUAL ALARM TIME
You can set two alarm times (AL1 and AL2).
EN
IT
] button, enter time
DE
FR
ES
] button, enter time
9