Dentsply Sirona inLab Speedcure Manuel D'instructions page 15

BULB AND FILTER REPLACEMENT (CONTINUED)
8. Push the bulb release lever far enough
to loosen the bulb from the socket.
10 IMPORTANT! Return the bulb release
lever to forward position.
12 Reinstall the center bulb bracket,
tighten retaining screws.
14. Plug AC Power Cord into wall outlet.
Turn power switch to ON position.
Tighten
2 screws
9. Remove bulb.
11. Insert new bulb. Retaining spring
should slide over bulb.
13. Close cover, secure with 2 screws.
12