Delay Start - Electrolux WAL3E300 Notice D'utilisation

16 www.electrolux.com
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
• Skipping wash phase - Only Rinse
option
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme.
The corresponding indicator above the
touch button illuminates.
7.7 Eco
The Eco option reduces the energy
consumption maintaining good washing
results.
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
Water and energy consumption may
depend on different causes, such as
water pressure, its hardness and
temperature, ambient temperature, type
and quantity of laundry, the set options,
spin speed and voltage fluctuations in
the electricity network. The display
shows the indicator
If you select the Cotton
programme at 40°C or 60°C
and no other options are set,
the display shows the
indicator
the standard cotton
programmes, the most
efficient programmes in
terms of combined energy
and water consumption.
.
; these are
7.8 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator
7.9 Soft Plus
Set the Soft Plus option to ensures
perfect distribution of the fabric softener
and improves the fabric softness.
This option increases slightly
the programme duration.

7.10 Delay Start

With this option you can delay the start of
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pause button,
the display shows the indicator
the selected delay time and the
appliance begins the countdown.
7.11 Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a
running programme.
.
and