Control Lever En; Function Switch; Start Up; Unpack The Device And Unload It - Kärcher B 300 RI D Mode D'emploi

4.3 Control lever
4.4

Function switch

5

Start up

5.1

Unpack the device and unload it

50
1 Brush contact pressure
2 Lever for steering wheel adjustment
3 Switching brushes on/off
4 Raising/lowering side brushes deck
5 Raising/lowering high emptying of waste container
6 Open/close flap of the waste container
1 Steering wheel
2 Multifunctional lever
for lights, indicators and horn
3 Not assigned
4 Not assigned
5 Filter cleaning for dust filter
6 Not assigned
7 Not assigned
8 Water pump switch
9 Switch for cleaning type: sweeping or scrubbing
Front position: Scrubbing cleaning type, the suction
bar lowers and the suction turbine switches on.
Rear position: Sweeping cleaning type, the sweeping
blower switches on. The suction bar remains up.
Central position: Switched off
DANGER
Risk of injury, risk of damage!
The vehicle is not approved for crane loading.

Do not use a forklift to unload/load the appliance.

The packaging material (plastic bag, thermocol, etc.) is

a potential source of danger and should not reach the
hands of children.
Carefully unpack the device while refraining from using

any tool that could damage the device. After unpacking,
check whether the device is complete and fully func-
tional. If not, call customer service.
Note information regarding pushing/towing the device

in a later chapter.
Mind the vehicle weight during loading!

Net weight (transport weight)
9
-
EN
1750 kg