Commissioning And Operation - Klarstein VARICOOK SLIM Mode D'emploi

COMMISSIONING AND OPERATION

After plugging in the unit, a beep will sound and all indicators will flash once to
indicate that the unit is connected to power. NOTE: Do not place any objects on the
sensor surfaces and make sure that the surfaces are always clean. Once you are
done cooking, press the power button to enter standby mode.
Cooking mode
Press the on/off button. The power indicator turns on and flashes, the unit is in
standby mode. Press the on/off button again to turn the unit off.
Left hotplate 2000 W
• In standby mode, press the SELECT button once to turn the unit on. A beep
sounds and the power indicator turns on. The display shows [1200], the preset
power of 1200 W. Use the [+/-] buttons to adjust the power. There are 10
power levels: 200 W, 400 W, 600 W, 800 W, 1000 W, 1200 W, 1400 W, 1600 W,
1800 W, 2000 W.
• Press the SELECT button three times to set the temperature. The display
shows [180], the preset temperature of 180 °C. Use the [+/-] keys to adjust the
temperature. There are 10 temperature levels: 60 °C, 80 °C, 100 °C, 120 °C, 140
°C, 160 °C, 180 °C, 200 °C, 220 °C, 240 °C.
• Press the MAX button, the display will show [2000], indicating that the
maximum power of 2000 W is set. Press the MIN key, the display shows [200],
signaling that the minimum power of 200 W is set. The power can be adjusted
in [Max] or [Min] mode using the [+] and [-] keys.
EN
21