Canopy Installation And Adjustment; Q.telescoping Stroller Handle Extension - Zippie VOYAGE Manuel D'instructions

Z IPP IE VO YA GE
P. CANOPY INSTALLATION AND ADJUSTMENT
It is always best to make sure the dependent is not seated in the mobility device during the
installation of accessories.
25 26
Canopy installation
a. From behind your mobility device, attach the canopy to the seating shell receivers (B).
b. Check that the canopy has been installed correctly by visual inspection and checking
for looseness, or an incorrect attachment. The plastic tabs (C) must be locked into
place for safe operation.
27
Canopy adjustment
a.
Once installed, you can adjust the canopy angle by pushing it forward or backward
until desired protection is obtained.
b.
(Advanced)
You can also loosen the button-head screws (D) and rotate the
Canopy Brackets (E) for more clearance or coverage for the occupant. Make sure
to adjust both sides evenly when adjusting the rotating canopy brackets.
c. Lift the front of the canopy all the way up for clearance and access to the child.
d. When canopy is being used with the tilt and recline adjustments, it may be necessary
to angle the canopy either forward or rearward for better clearance with the push
handle.

Q.TELESCOPING STROLLER HANDLE EXTENSION

To adjust the Handle
The handle height is adjustable for pushing comfort.
a. Stand behind your mobility device, and squeeze the handle height adjustment button
(A) while pulling the handle toward you.
b. Adjust to the appropriate comfort level.
WARNING
28
17
VIII. USE AND MAINTENANCE
E
25
26
27
28
MK-100377 Rev. A