Technical Data Tempspray-H126; Technical Data Tempspray-H426 - WAGNER TempSpray-H126 Mode D'emploi

TempSpray-H326 / -H226 / -H126/ -H426
3.6

TecHNicaL DaTa TeMPSPray-H126

Voltage :
Fuses :
Unit connecting line :
Max. current consumption :
Degree of protection :
Max. heating output :
Max. operating pressure :
Hose :
Inner diameter :
Length :
Fitting :
screw connection to the
device
Max. viscosity of the
coating material :
Adjustable temperature range: 20°C - 60°C
Dead weight :
Performance :
Max. nozzle size :
(Continuous operation
with water)
Max. nozzle size :
(Continuous operation
with emulsion paint)
* based on surrounding and material temperature of 20°C.
During intervallic operation (gun opened/closed) bigger noz-
zles can be used.
230 Volt ~, 50 - 60 Hz
16 A
4 m long, 3x1.5 mm²
2.6 A
IP 54
0.6 kW
25 MPa (250 bar)
DN6-10m-steel reinforced
6 mm
10 m
1/4" NPSM
1/4" NPSM
5,000 mPas
3.2 kg
0.011";
more than 50°C -> 0.009"
0.015";
more than 50°C -> 0.013"
3.7

TecHNicaL DaTa TeMPSPray-H426

Voltage :
Fuses :
Unit connecting line :
Max. current consumption :
Degree of protection :
Max. heating output :
Max. operating pressure :
Hose :
Inner diameter :
Length :
Fitting :
screw connection to the
device
Max. viscosity of the
coating material :
Adjustable temperature range: 20°C - 60°C
Dead weight :
Performance :
Max. nozzle size :
(Continuous operation
with spray putty)
* With this maximum nozzle size, a temperature setting of
60°C and an ambient temperature of 7°C, the emerging mate-
rial has a processing temperature of 25°C.
GB
descrIptIon of unIt
230 Volt ~, 50 - 60 Hz
16 A
4 m long, 3x1.5 mm²
5.9 A
IP 54
1.3 kW
25 MPa (250 bar)
DN13-15m-textile reinforced
13 mm
15 m
1/2" NPSM
3/8" NPSM
40,000mPas
19 kg
0,052"
37