Switching Off The Alarm; Switching The Radio Mode On/Off; Adjusting The Volume; Search For A Station - SilverCrest SKR 800 B2 Mode D'emploi Et Consignes De Sécurité

Switching off the alarm
♦ While the alarm is sounding, press the
−VOLUME+ | ON/OFF
If the alarm is not manually deactivated, the device will switch off the alarm
automatically after 1 hour.
Switching the radio mode on/off
NOTE
► The technical features of this device enable an adjustable reception capa-
bility that exceeds the permitted FM frequency range of 87.5–108 MHz.
In some countries, different national regulations may apply to the assigned
radio frequency ranges. Please note that information received outside of the
assigned radio frequency ranges may not be exploited, passed on to third
parties or otherwise misused.
Turn the −VOLUME+ | ON/OFF
♦
Press the −VOLUME+ | ON/OFF dial again to switch off the radio mode
♦
and to switch the device back into the clock/standby mode.

Adjusting the volume

Turn the −VOLUME+ | ON/OFF
♦
Turn the −VOLUME+ | ON/OFF dial to the left to decrease the volume.
♦
The set volume will be shown on the display
and .

Search for a station

Press the Preset + | SEARCH + button
♦
station that can be received with a higher frequency.
Press the Preset − | SEARCH − button
♦
station that can be received with a lower frequency.
The station frequency is shown on the display
off during the station search. If a station broadcasting in stereo is being received,
appears on the display.
■ 36 │ GB │ IE
| Mem/AMS button
dial to switch off the alarm for 24 hours.
dial to turn on the radio mode.
dial to the right to increase the volume.
as a value between
for 2 seconds to jump to the next
for 2 seconds to jump to the next
and the speakers
or the
(mute)
are switched
SKR 800 B2