Activating/Deactivating The Auto Power Save (A - JVC NX-W5W Manuel D'instructions

To mute the sound temporarily
To restore the sound, press the button again or
[VOLUME+].
Activating/deactivating the Auto
Power Save (A.P.S.)
This function turns off the System automatically if
no operation is performed for 15 minutes.
1
Display the timer setting screen.
2
Select "A.P.S".
/
(Press repeatedly)
3
Set the item.
/
(Press repeatedly)
A.P.S. ON
A.P.S. OFF (Cancel)
The setting is completed when "COMPLETE" is
displayed after performing the setting.
A.P.S ON:
If no operation is performed for 15 minutes in the
following situations, the System turns off
automatically.
- The volume level is set to "MIN" or Muting is
activated.
- "USB" or "BLUETOOTH" is selected as the
source, and no device is connected.
- "USB" or "CD" is selected as the source, and
playback is stopped.
- "AUDIO IN" or "DIGITAL IN" is selected as the
source, and there is no sound input
A.P.S OFF:
Auto Power Save is set to Off.
Approximately 1 minute before the power is
0
turned off, "A.P.S." starts to blink.
The 15-minute countdown restarts when you
0
operate any buttons.
The initial setting is "A.P.S. ON".
0
15