Using Ustream With An Audio Device; Stopping Playback - Unitron uStream Guide

Using uStream with an audio device

Streaming music via Bluetooth
If you have an audio playback device equipped
with Bluetooth functionality (e.g. MP3 player
or computer), uStream may be used to stream
audio wirelessly to your hearing aids.
Pairing your audio device
1. Enable Bluetooth on your device/phone.
2. Starting with the uStream in the off
position, press and hold the ( ) button
and turn the uStream on. The blue audio
indicator will flash.
3. Enable Bluetooth paring mode on your
device so that a new device can be added.
See manufacturer instructions for details. If
prompted, enter "0000" for pairing code.
4. After successful pairing, the blue audio
indicator on the uStream will stop blinking.
28
Playing audio from your device
1. Begin playback on your device.
2. Adjust the volume level on the device to
a medium to high level.
3. Make minor volume adjustments with the
uStream volume buttons (
Pausing playback
If you want to temporarily stop streaming to
hear a conversation, press the ( ) button to
pause the streaming. Press the ( ) button
again to resume streaming.

Stopping playback

To stop playback on your device and switch
back to regular hearing programs, press and
hold the access ( ) button for two seconds.
Note: Please refer to the device's user guide
or dealer support if you cannot complete
the pairing procedure with the generic steps
described.
).
29