Canon iRC3580 Guide De L'utilisateur page 52
Masquer les pouces
Voir aussi pour iRC3580:
- Guide de référence (580 pages) ,
- Guide de l'utilisateur (96 pages) ,
- Guide de mise en réseau (210 pages)
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT
If the main power indicator on the control panel does not light even though the main power switch is ON,
be sure to check the breaker to see if it is OFF. (See "When the Power Does Not Turn ON," in the
Reference Guide.)
4
The screens on the right are displayed
while the system software is loading.
1
● If login authentication by a login service (SDL
(Simple Device Login) or SSO (Single
Sign-On)) is not set, and an application other
than MEAP is selected as the initial function in
Common Settings (from the Additional Func-
tions screen):
❑
The Start Up screen is displayed until the machine is
ready to scan.
If a message is displayed on the touch panel display,
proceed to step 5.
❑
The screen on the right is displayed when the
machine is ready to scan.
The machine is ready to scan in approximately 30
seconds (for the iR C3580/iR C3080) or 38 seconds
(for the iR C3580i/iR C3080i/iR C2380i) after the
screen on the right appears.
1-22
Main Power and Control Panel Power
Publicité
Chapitres
