Canon iRC3580 Guide De L'utilisateur page 34

■ Avoid exposing the machine to rapid
changes in temperature.
If the room in which the machine is installed is cold but
rapidly heated, water droplets (condensation) may form
inside the machine. This may result in a noticeable
degradation in the quality of the copied image, the inability
to properly scan an original, or the copies having no
printed image at all.
1
■ Avoid installing the machine near computers or other precision electronic
equipment.
Electrical interference and vibrations generated by the machine during printing can adversely affect the
operation of such equipment.
■ Avoid installing the machine near televisions, radios, or similar electronic
equipment.
The machine might interfere with sound and picture signal reception. Insert the power plug into a
dedicated power outlet, and maintain as much space as possible between the machine and other
electronic equipment.
■ Do not remove the machine's leveling feet.
Do not remove the machine's leveling feet after the machine has been installed. If you put weight on the
front of the machine while the drawers or units within the machine are pulled out, the machine may fall
forward. To prevent this from happening, make sure that the machine's leveling feet are in place.
1-4
Installation Location and Handling