Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AUDIO SETTINGS
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
*
1
Before making an adjustment, select the speaker:
When 2-way crossover is selected:
FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER:
[REAR LEFT], [REAR RIGHT] and [SUBWOOFER] is selectable only if a setting other than
[NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 21)
When 3-way crossover is selected:
TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER:
[WOOFER] is selectable only if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE]. ( 22)
*
2
Displayed only when [X ' OVER TYPE] is set to [2-WAY] ( 20) and if a setting other than
[NONE] is selected for [REAR] of [SPEAKER SIZE]. ( 21)
If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the differences between the
distance of the furthest speaker (rear
speaker) and other speakers.
4 Set the [DISTANCE] calculated in step
individual speakers.
5 Adjust [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the
listening position

DISPLAY SETTINGS

1
Press and hold
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
2
Repeat step
until the desired item is selected/activated or follow
the instructions stated on the selected item.
3
for
4
Press
to exit.
To return to the previous setting item, press
DISPLAY
DIMMER
Dim the illumination.
OFF: Dimmer is turned off. Brightness changes to [DAY] setting.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
(  24, [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 ; [OFF]: 6:00)
DIMMER AUTO: Dimmer turns on and off automatically when you turn off or
on the car headlights. *
*
1
The illumination control wire connection is required. ( 31)
.
.
1
Default: XX
23
ENGLISH

Publicité

Table des Matières
loading

Table des Matières