Display Settings - JVC KD-R775S Manuel D'instructions

DISPLAY SETTINGS

KD-R775S
1 Press and hold .
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Dim the display and buttons illumination.
OFF: Dimmer is turned off.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
( [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 or 6:00 PM
[OFF]: 6:00 or 6:00 AM)
AUTO: Dimmer turns on and off automatically when you turn off or on the car
1
headlights. *
BRIGHTNESS Set the button, display and USB input terminal brightness for day and night
separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone.
3 Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 15)
SCROLL * 2
ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at
5-second intervals. ; OFF: Cancels.
* 1
The illumination control wire connection is required. ( 25)
KD-R670 / KD-R570 / KD-R470 /
KD-R370
.
Default: XX
COLOR (for KD-R775S)
PRESET Select color for display and button illumination separately.
Default color:
ALL ZONE: [COLOR 08], DISP ZONE: [COLOR 01],
ZONE 1: [COLOR 08], ZONE 2: [COLOR 46]
1 Select a zone.
2 Select a color for the selected zone.
• COLOR 01 to COLOR 49
• USER: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• COLOR FLOW01 to COLOR FLOW03: Color changes at different
speeds.
• GROOVE/ TECHNO/ EMOTION/ RELAX/ SPECTRUM/ SWEEP/
POP: The selected color pattern is shown.*
[ALL ZONE] is selected in step
DAY COLOR Store your own day and night colors for different zone.
1 Select a zone.
2 RED / GREEN / BLUE: Select a primary color.
3 00 to 31: Select the level.
Repeat steps 2 and 3 for all the primary colors.
NIGHT COLOR
• Your setting is stored to [USER] in [PRESET].
• If [00] is selected for all primary colors for [DISP ZONE], nothing
appears on the display.
COLOR GUIDE ON: Changes the button, display, and auxiliary input jack illumination
when settings are performed on menu and list search. Display zone will
automatically change depending on volume level. ; OFF: Cancels.
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3
If one of these color pattern is selected, the [ZONE 1], [DISP ZONE], [ZONE 2] illumination
color will change to the default color.
3
(Selectable only when
1
.)
17
ENGLISH