JVC KD-X441DBT Manuel D'instructions page 12

USB/iPod/ANDROID
Select control mode
While in iPod USB source, press
Control iPod from this unit.
HEAD MODE:
IPHONE MODE: Control iPod using the iPod itself. However, you can still
play/pause or file skip from this unit.
While in ANDROID source, press
AUTO MODE: Control Android device from this unit via JVC MUSIC PLAY
application installed in the Android device.
AUDIO MODE: Control Android device using the Android device itself via
other media player applications installed in the Android
device. However, you can still play/pause or file skip from
this unit.
Select music drive
While in USB source, press
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass Storage
Class).
• Selected drive of a multiple drives device.
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver's
operations from the iPhone/iPod (via USB input terminal).
Preparation:
Install the latest version of JVC Remote application on your device before
connecting. For more information, visit <http://www.jvc.net/cs/car/>.
You can make the settings in the same way as connection via Bluetooth.
( 17)
10
ENGLISH
repeatedly.
repeatedly.
repeatedly.
Select a file from a folder/list
For iPod/ANDROID, applicable only when [HEAD MODE]/[AUTO MODE] is
selected.
1
Press .
2
Turn the volume knob to select a folder/list, then press the knob.
3
Turn the volume knob to select a file, then press the knob.
Quick search
(applicable only for USB and ANDROID source)
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
Alphabet search
(applicable only for iPod USB and ANDROID source)
You can search for a file according to the first character.
For iPod USB source
Press or turn the volume knob quickly to select the
desired character (A to Z, 0 to 9, OTHERS).
• Select "OTHERS" if the first character is other than A to Z, 0 to 9.
For ANDROID source
1
Press to enter character search.
2
Turn the volume knob to select the desired character.
^A^ : Upper case letters (A to Z)
_A_ : Lower case letters (a to z)
-0- : Numbers (0 to 9)
-OTHERS- : Character other than A to Z, 0 to 9
3
Press the volume knob to start searching.
• To return to the previous setting item, press
• To cancel, press and hold
.
.