Access To Measurements And Personalisation Data; Display Menus Arrangement; Access To Measurements; Personalisation Using The Control Panel - Eaton Pulsar Serie Manuel D'installation Et D'utilisation

4. Access to measurements and personalisation data

4.1 Display menus arrangement

Status and Alarms
UPS input measurements
UPS output measurements
Local personalisation
Output personalisation

4.2 Access to measurements

Press the scroll button (25) to access any status conditions and alarms, then the measurements for voltage, current,
frequency, power output and battery backup time.

4.3 Personalisation using the control panel

ESC
Local personalisation
Function
Language
Audio alarm
34007776EN/AD - Page 16
Status and Alarms
Measurements
Battery measurements
Personalisation
ON/OFF personalisation
Battery personnalisation
25
26
Factory setting
English
Enabled
Press the scroll button (25) several times until the personalisation
menu is reached.
Press the Enter button (26) to access the different possibilities.
Finally, confirm the selection by pressing the Enter button (26)
again.
Other available settings
French, Spanish, German, Italian, Dutch
Disabled