Repairs; Spare Parts - Husqvarna HTC 950 RX Manuel De L'opérateur

Maintenance and repairs
• Check the seals on the shafts on which the upper belt runs and replace if
necessary.
• Scrape and vacuum-clean the parts shielded by the grinding cover.
• Test run and listen for any dissonance from the bearings.
• Clean or, if necessary, replace the filter to the electrical cabinet.
• Check the functioning of the radio control unit's ME-STOP button.
• Check the parts that wear on the radio control unit, e.g. the dust cover.
5.8

Repairs

Any repairs that may be required must be carried out by a HTC authorised service
centre. Contact your retailer if your machine requires servicing. For contact information,
see Contact Information at the end of the manual.
5.9

Spare parts

To ensure rapid delivery of spare parts, always specify the model, the machine's serial
number and the spare part number when ordering. Information on the model and serial
number can be found on the machine's name plate.
Information on spare part numbers can be found in the machine's spare parts list which
is available to read or print out from the accompanying digital media or HTC's website:
www.htc-floorsystems.com.
Only original tools and spare parts from HTC may be used. Otherwise, neither the CE
marking nor the warranty will be valid.
36
HTC 950 RX
5.0