Fitting Grinding Tools - Husqvarna HTC 950 RX Manuel De L'opérateur

HTC 950 RX
4.7.1

Fitting grinding tools

1. Slide the grinding tool diagonally, from above, down into the appropriate guide slot
on the tool holder, see Figure 4-13, page 25. Then push the tool fully into the
guide slot.
Figure 4-13. Fitting grinding tools
2. Lock the grinding tool into the tool holder by giving it a few light taps with a
hammer, see Figure 4-14, page 25.
Figure 4-14. Removing grinding tools
5.0
Operation
25