Remote Functions - Sleep Timer; Remote Functions - Keypad Lock; Remote Functions - Battery Level Indicator - Empire Comfort Systems Mantis Manuel D'utilisation

Masquer les pouces Voir aussi pour Mantis:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Remote Functions - Sleep Timer
The remote is equipped with a sleep timer to automatically shut off
the fireplace after a certain time. The sleep timer may be set in 15
minute increments for up to 8 hours.
1.
Press the menu button on the remote to enter the sleep timer
menu indicated by the crescent moon icon displayed on the
screen. Use the adjustment button to set the desired length of
time before the fireplace shuts down.
2.
Once the desired length of time is shown, press the menu
button two more times to save the setting and return to the
remote's home screen. The outline of the crescent moon icon
indicates that the sleep timer mode is active. The clock will
count down the remaining time.
AUTO
Note:
If the remote buttons are not used for seven seconds
while setting the sleep timer, the remote will automatically exit
the sleep timer menu and assume the last settings entered in
the menu.
Page 14
To deactivate the Timer Mode, return to the Sleep Timer menu and
set the timer to 0 (zero) minutes. Press the menu button twice to
exit the menu and save the settings. The remote's home screen
will no longer display the crescent moon icon, indicating that the
sleep timer mode is not active.
Note:
While the Sleep Timer Mode is active, the remote will
respond normally to new commands entered.
Remote Functions - Keypad Lock
The remote control is equipped with a keypad lock to prevent ac-
cidental changes to the remote settings.
1.
To activate the lock, press and hold the menu button for 5
seconds. A padlock icon will appear on the display indicating
that the keypad is locked.
MAN
2.
To deactivate the lock, press and hold the menu button for
5 seconds. The padlock icon will disappear when the lock is
deactivated.
Remote Functions - Battery Level Indicator
The remote control is equipped with a battery level indicator which
will appear when the remote's battery charge is low. Replace the
batteries with 3 AAA sized 1.5V batteries. Alkaline batteries are
recommended for maximum battery life and remote performance.
MAN
29432-1-0512

Publicité

Chapitres

Table des Matières
loading

Table des Matières