Siemens ECHOMAX Manuel D'application page 5

Applications
Note:
Transducers are to be used only in the manner outlined in this manual.
Normally, transducers require no cleaning or maintenance. However, if performance
changes are observed, immediately shut down the level measurement system and
perform a thorough inspection, especially on the transducer.
Liquid Applications – Open Channel Meter
Applicable Transducers:
IMPORTANT:
measurement.
Note:
The OCM III requires the use of the TS-2 external temperature sensor
instead of the transducer's internal temperature sensor. Using the external
temperature sensor provides better temperature tracking in applications with
rapidly changing temperatures.
7ML19985HV61
• Echomax XPS/XCT series
typical V-notch weir
Refer to OCM manufacturer specification for proper point of head
Transducers – APPLICATION MANUAL
• Echomax XRS-5 series
Please refer to Siemens Milltronics
controller manual for
minimum distance above
maximum head.
Page EN-3