Safety Guidelines - Siemens ECHOMAX Manuel D'application

Transducers Application Manual
Refer to this manual for application information for Siemens Milltronics Echomax® XPS/
XCT, XLT, XRS-5, and Siemens Milltronics ST-H Series transducers. For information about
specific transducer setup and operation, please refer to the appropriate manual available
for purchase from your Siemens representative or from our website:
www.siemens.com/processautomation.
Questions about the contents of this manual can be directed to:
Siemens Milltronics Process Instruments Inc.
1954 Technology Drive, P .O. Box 4225
Peterborough, Ontario, Canada, K9J 7B1
Email: techpubs.smpi@siemens.com
Copyright Siemens Milltronics Process
Instruments Inc. 2004.
All Rights Reserved
We encourage users to purchase
authorized bound manuals, or to view
electronic versions as designed and
authored by Siemens Milltronics Process
Instruments Inc. Siemens Milltronics
Process Instruments Inc. will not be
responsible for the contents of partial or
whole reproductions of either bound or
electronic versions.
MILLTRONICS is a registered trademark of Siemens Milltronics Process Instruments Inc.

Safety Guidelines

Warning notices must be observed to ensure personal safety as well as that of others,
and to protect the product and the connected equipment. These warning notices are
accompanied by a clarification of the level of caution to be observed.
WARNING: relates to a caution symbol on the product, and means that failure to
observe the necessary precautions can result in death, serious injury, and/or
considerable material damage.
WARNING: means that failure to observe the necessary precautions can result in
death, serious injury, and/or considerable material damage.
CAUTION: means that failure to observe the necessary precautions can result in
considerable material damage.
Note: means important information about the product or that part of the operating manual.
7ML19985HV61
While we have verified the contents of this manual
for agreement with the instrumentation described,
variations remain possible. Thus we cannot
guarantee full agreement. The contents of this
manual are regularly reviewed and corrections are
included in subsequent editions. We welcome all
suggestions for improvement.
Technical data subject to change.
Transducers – APPLICATION MANUAL
Disclaimer of Liability
Page EN-1