Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
Multi-function flashlight with Bluetooth
Item no. 1381182
Intended use
This multi-function flashlight offers the following features:
• Audio playback
• Answer/decline calls
• Microphone for making calls
• Volume setting
• Power bank
• Flashlight
The product can be paired with a mobile phone or audio playback device via Bluetooth
playback and phone calls. Do not use the product as a bicycle light. The built-in rechargeable
battery can be charged via a USB power source. The product can be used outdoors.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read
the instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company names
and product names are trademarks of their respective owners. All rights reserved.
Important!
Always follow the instructions in the user guide for your device that you wish to pair with
the product via Bluetooth. Some models may not support all features in the format described
in these operating instructions. Unfortunately it is not possible to list the differences due to
space constraints.
Delivery content
• Multi-function flashlight
• USB cable
• Support
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• The rechargeable battery is permanently built into the product and cannot be
replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable
battery might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product.
Due to the rechargeable battery technology being used, you do not need to discharge
the rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is normal
that a certain amount of heat is generated during charging.
• Lay the cable so that it will not get trapped or damaged by sharp edges and ensure
that it does not constitute a tripping hazard.
• Do not look directly into the LED light! Do not look into the beam directly or with
optical instruments!
• The product must not be placed near devices with strong electrical or magnetic
®
fields, e.g. transformers, motors, radios and microwaves, as these could affect the
functioning of the product.
• Keep cards with magnetic strips (e.g. credit cards) and pace makers or other
medical devices away from the product. In certain circumstances it is possible that
the product may cause allergic reactions when you hold it in your hand for a long
time, depending on your skin type.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating elements
for audio
®
1
1
Speaker
2
button
3
button
4
button
5
button
6
Indicator lights
Operation
When the flashlight base is attached, the product is suitable for outdoor use and is
splashproof. However, do not immerse the product in water and do not let any water get
into the product.
a) Charging the battery
Battery charging times:
USB power supply
USB interface
Battery life:
Audio playback
*
Phone calls
*
Flashlight
*/**
only one feature in operation
*
highest brightness level
**
Fully charge the battery before using the product for the first time.
1.
If the flashlight is turned on, turn it off first. Refer to "f) Flashlight".
2.
Remove the flashlight base (10) from the product by pulling it downwards slightly from the
bottom of the product.
3.
Connect one end of the USB cable included with the product to the USB port (8) and the other
end to a USB interface or a USB power adapter.
4.
The red indicator (6) will turn on when the power supply is turned on. The battery will start to
charge. The indicator light will turn off when the battery is fully charged. Refer to "Table 1".
5.
Disconnect the USB cable from the product when the battery has finished charging.
6.
Place the flashlight base back onto the product. Ensure that you pay attention to the correct
orientation. Ensure that the base clicks into place.
• The battery life for different usage scenarios is listed in "Table 2".
Empty battery:
Charge the battery in the following circumstances:
• If Bluetooth is turned on and the battery is almost empty, you will hear a beep at regular intervals
and the red indicator will flash quickly. Bluetooth will then be disabled.
2
3
4
5
6 7
8
7
Microphone
8
USB connection
9
USB connector
10
Flashlight base
11
LED light
approx. 3 – 5 hrs
A 5 V, 1 A USB power supply is
recommended
approx. 6 hrs
approx. 10 hrs
approx. 40 – 50 hrs
approx. 4 – 5 hrs
9
10
11
Table 1
Table 2
Publicité
Table des Matières
