Technical Specifications - STEINEL HF 3360 LiveLink Manuel D'instructions

The sensor is connected to the LiveLink Box as a control unit via a DALI bus. The
sensor uses the DALI line for communicating with the LiveLink Box and for supplying
power. To extend the detection zone, the LiveLink sensors only work in the LiveLink
system with suitable STEINEL DALI sensors.
Reach setting via LiveLink apps
Start-up app: LiveLink Install
7� Operation/maintenance
The Sensor is suitable for switching on a light automatically. The unit is not suitable
for burglar alarm systems as it is not tamperproof in the manner prescribed for such
systems. The surface can be cleaned with a damp cloth (without detergents) if dirty.
8� EC Declaration of Conformity
Hereby, STEINEL Vertrieb GmbH declares that the radio equipment type HF 3360
LiveLink is in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address: www.steinel.de
9� Manufacturer's Warranty
As purchaser, you are entitled to your statutory rights against the vendor. If these
rights exist in your country, they are neither curtailed nor restricted by our Warranty
Declaration. We guarantee that your STEINEL Professional sensor product will remain
in perfect condition and proper working order for a period of 5 years. We guarantee
that this product is free from material-, manufacturing- and design flaws. In addition,
we guarantee that all electronic components and cables function in the proper man-
ner and that all materials used and their surfaces are without defects.
Control app: LiveLink Control
20
Making Claims
If you wish to make a claim, please send your product complete and carriage paid
with the original receipt of purchase, which must show the date of purchase and
product designation, either to your retailer or contact us at STEINEL (UK) Limited,
25 Manasty Road, Axis Park, Orton Southgate, Peterborough, PE2 6UP, for a re-
turns number. For this reason, we recommend that you keep your receipt of purchase
in a safe place until the warranty period expires. STEINEL shall assume no liability for
the costs or risks involved in returning a product.
For information on making claims under the terms of the warranty, please go to
www�steinel-professional�de/garantie
G B
If you have a warranty claim or would like to ask any question regarding your product,
1
you are welcome to call us at any time on our Service Hotline
Y E A R
01733 366700.
MANUFACTURER'S
WARRANTY
10� Technical specifications
Dimensions Surface-mounted installation, round Ø
(L × W × H) Surface-mounted installation, square
Concealed installation, round Ø
Concealed installation, square
Power consumption LiveLink Box 9 mA / 5 DALI users,
12-22.5 V
LiveLink output 1 DALI control line (multi-master capability for communication
with the LiveLink Box)
Angle of coverage 360° with 180° angle of aperture
Application inside buildings
Sensor system 5.8 GHz high frequency
Transmitter power approx. 1 mW
Brightness measurement 2 - 1000 lux
IP rating Surface-mounted: IP54
Temperature range -20°C to +50°C
Mounting height 2 – 2.8 m
5
3
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
126 × 52 mm
95 × 95 × 52 mm
124 × 64 mm
94 × 94 × 64 mm
, no SELV
Concealed: IP20
21