Nightlight; Eco Mode - Philips AVENT SCD843 Instructions

ECO
ECO
1
ECO 20°C

Nightlight

ECO mode

1 Press the mode button on the side of the parent unit to switch to ECO
mode.
Note: When the display is on, the selected mode will be visible in the
status bar. The status bar is not visible when the display is off.
When the ECO mode is activated the display and sound of the parent
unit switch off when no sound is detected for 20 seconds. The ECO light
lights up green to indicate that the ECO mode is activated. During ECO
mode the display and sound transmissions are turned off.
When sound is picked up by the baby unit, the display and sound of the
parent unit switch on immediately. The sounds are transmitted to the
parent unit and the sound level lights light up green. As long as no sound
is detected, the sound level lights are off.
Note: The minimum sound level to activate sound and display is defined
by the sensitivity setting.
1 Press the nightlight on/off button on the baby unit to switch on the
nightlight feature.
17
English