Product Description And Type Designation; Product Overview - Videotec MAXIMUS MLX Manuel D'instructions

• For all maintenance interventions, we recommend
you return the product to the laboratory that will
perform all required operations.
• To comply with the main supply voltage dips and
short interruption requirements, use a suitable
Uninterruptible Power Supply (UPS) to power the
unit.
• To feed the product use a safety transformer
and/or a voltage isolated power supply with the
appropriate characteristics. The characteristics
of output power must not exceed the following
values. Supply voltage: 24Vac (±10%) or 24Vdc
(±5%).
• In the case of a 24Vac power supply, you must
provide for adequate separation from the AC
power supply line using double or reinforced
insulation between the main power supply line
and the secondary circuit.
4 Product description and
type designation
The flameproof illuminator was designed for
installations in potentially explosive environments
made of AISI 316L, shot peened and electro-polished
stainless steel. The illuminator can be powered
24Vac, 24Vdc or using an Ethernet (PoE+) cable. The
illuminator is equipped with a 1/2" NPT input. The
illuminator has an IP66/IP68/IP69 level of protection
and can be installed, according to the class, in an
ambient with temperatures that vary between -40°C
up to +70°C.
8

4.1 Product overview

The main parts of the product are illustrated below.
01. Fastening support.
02. Reinforcement support.
03. Housing support.
04. Spacer.
05. M8x80 screw.
06. Housing.
06
04
Fig. 1
01
03
05
MNVCMLX_2222_EN
02