4. SETTINGS
1. List of available settings
This section explains all the settings available on the intercom panel. In order to adjust the
settings, the front must be removed beforehand. Each adjustment to the settings causes
a change to the LED and also triggers a sound notification (Fig.3). When you remove the
front of the intercom panel, you will find 2 modules:
The upper module consists of 4 buttons, the camera module, the microphone and the
loudspeaker.
The lower module consists of the call button but is not used during settings adjustments.
- Illuminated
name holder
Chapter
2
Deutsch, Français, Ned-
3
erlands, Italiano, Portu-
4
5
6
WelcomeHive Pro Outdoor4 - Outdoor8 / V4
Upper module
RF CARD
Settings values
RF CARD
ID = 0 - 3
English, Español,
guês, Polski
0-5
Normally
Open/Closed
1-99s
RF CARD
LED1
Lower module
LED2
E
D
C
B
RF CARD
A
Default value
0
English
3
Normally Closed
1s
GB16