Setting The Duration Of Unlocking; Setting Access By Rfid Badge; Managing Rfid Administration Badges; Adding Rfid Badges - Philips WelcomeHive Pro Outdoor4 Notice

6. Setting the duration of unlocking (Fig.8)
Settings values

7. Setting access by RFID badge

a. Managing RFID administration badges (Fig.9)
b. Adding RFID badges (Fig.10)
c. Deleting RFID badges (Fig.11)
d. Deleting all RFID badges (Fig.12)
8. Factory settings (Fig.13)

5. SETTINGS FROM THE SCREEN

> Set the number of intercom panels installed in the system. This code needs to be entered
in only one screen for the whole building. This setting will apply to all screens:
9101: 1 intercom panel (default)
9102: 2 intercom panels
9103: 3 intercom panels
9104: 4 intercom panels
> Apartment address – on the principal monitor of an apartment:
8201 = Apartment 1
8231 = Apartment 31
8200 = Apartment 32
> Secondary screen code: 8001 – 8003
WelcomeHive Pro Outdoor4 - Outdoor8 / V4
1-99s
1
Default value
1s
2
[0000]
5 sec
3
GB18