Monitoring Function And Response To A Call; Intercom Function; Settings - Philips WelcomeEye Connect DES9900VDP - 531002 Notice D'utilisation

: indicates that the memory is full. The oldest photos/videos are replaced with
the new recordings.
A. Monitoring function and response to a call
1 2
1: To switch to the view of the second intercom panel or camera, or return to the main
menu.
2: To establish voice communication with the intercom panel and hang up.
3: To open the electric strike plate.
4: To open the gate.
5: To take a photo or video in accordance with the settings selected.
B. Intercom function
1
Function only valid if an additional monitor is connected and the parameters are set
correctly.
1: To exit the function
2: To call the family's other monitors, to respond when receiving a call from another monitor
or to hang up.
C. Settings
The settings menu consists of three pages for the WelcomeEye Connect and two pages
for the WelcomeEye Touch. To switch from one page to the next, simply slide the screen
to the right or left.
Click on to return to the previous menu.
1 2 3
3 4
2
4 5 6 7
WelcomeEye Connect / Touch / 09/17
5
8 9 10 11
GB10