Cleaning And Caring For The Camera; Warranty; Disposal - Dometic CAM200 Instructions De Montage Et De Service

CAM200
I
NOTE
To minimise corrosion in the plug, apply a small amount of grease – such as pin grease
– inside the plug.
Aligning the camera
➤ Use the monitor image to align the camera (fig. g, page 12).
➤ Use the monitor image to check the function of the camera.
8

Cleaning and caring for the camera

A
NOTICE! Risk of damage!
Do not use sharp or hard objects to clean the device as these may damage the device.
➤ Clean the camera with a soft, damp cloth from time to time.
9

Warranty

The statutory warranty period applies. If the product is defective, please contact your retailer or the
manufacturer's branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when you send in the
product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
10

Disposal

➤ Place the packaging material in the appropriate recycling waste bins, wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling center or specialist
dealer for details about how to do this in accordance with the applicable disposal
regulations.
EN
19