Wiring Of The Power Cord (Single-Phase) - Gree GFH 09 EA-K6DNA1B/I Mode D'emploi

⑤.During the wiring, the wiring terminal or the single-core wire must be used; the
direct wiring between the
⑥ .All wiring should be done strictly in accordance with the wiring diagram;
otherwise the improper wiring would cause the air conditioning unit running abnormally
or damaged.
⑦.Do not let the electric wires touch the refrigerant pipe, the compressor, the fan
or other moving parts.
⑧ .Do not modify the wiring inside the indoor unit randomly; otherwise the
manufacturer won't assume any responsibility for the damage or abnormal running of
the unit.

16 Wiring of the Power Cord (single-phase)

CAUTION!
The power supply for each indoor unit must be uniform.
①. Dismantle the cover of the electric box of the indoor unit.
②. Let the power cord go through the rubber ring.
③. Connect the wiring (communication) through the piping hole of the chassis and
the bottom of the appliance upward, then connect the brown wire to the Terminal board
"3";black wire(the communication wire) to the Terminal board"2";blue wire to the
Terminal board"N(1)",and connect the earthing wire to the screw terminal on the electric
box. Clamp them with the corresponding wire clamp packed in the chassis.
④. Fix the power cord tightly with the binding wire.
multi-core wire and wiring board would cause fire.
XT1
2 3
N(1)
BU BK BN
2 3
N(1)
OUTDOOR UNIT
Fig.21
18
Unitary Duct Split Unitary Duct Split
PE