Festo CMMD-AS Serie Mode D'emploi page 23

4 On-site diagnostics
The meaning of the symbols in the displays is explained in
the following table.
Display Significance
"Speed adjustment" operating mode
The external segments are displayed rotating. With
active controller enable the centre bar is also active.
The CMMD-AS motor controller still needs to be
parametrised, display "A"
"Speed-regulated operation" operating mode,
display "T"
P.xxx "Positioning" operating mode
The numerals xxx are displayed one after the other
and stand for the position record numbers.
PH.x "Reference travel" operating mode
The numeral x stands for the respective phase of
homing.
E.xxy Error message with index "xx" and sub-index "y"
-xxy- Warning message with index "xx" and sub-index "y"
Festo P.BE-K-CMMD-AS 1002NH English 23