Key Functions Of The Remote Controller - Klarstein WINDWAKER Mode D'emploi

EN
76

KEY FUNCTIONS OF THE REMOTE CONTROLLER

1.­ON/OFF
• Press this button to turn on/off the appliance.
• This will clear the existing timer and SLEEP settings.
2.­°C/°F
• Press this button to set the temperature display to Fahrenheit, which is displayed by
default in Celsius. The "°C" will not be displayed on the LCD.
• Press this button again to restore the temperature display to Celsius.
Note: Temperature display in Fahrenheit is not available for some models. When
temperature is displayed in Fahrenheit on the remote controller, it might be in Celsius
on the appliance, the function and operation of which will not be affected.
3.­SPEED
Press this button, you can select the fan speed as follows:
Note: AUTO air speed is not available in FAN mode.
4.­DISPLAY
• Press this button to turn on/off the display. This is for the convenience of users who
are unconformable sleeping with the backlight on.
5.­iFEEL
• Press this button to set the temperature display on the remote controller to ambient
temperature and press this button again to set it to preset temperature.
6.­TIMER
• With the appliance ON, press this button to set OFF timer or with it OFF to set ON
timer.
• Press this button once, a "ON (OFF)" will flash. Press
number of hours in which the appliance will be turned ON/OFF, with an interval
of 0.5 hour if less than 10 hours, or 1 hour if longer than 10 hours , and a range of
0.5-24 hours.
• Press it again to confirm the setting, the "ON (OFF)" will stop flashing.
and buttons to set the