Klarstein WINDWAKER Mode D'emploi page 75

Notes on the Remote Controller
• Before first time use of the remote controller, install the batteries and ensure the
minus and plus poles (+/-) are correctly positioned.
• Ensure the remote controller is pointed to the signal receiving window, and that
there is no obstruction in between and the distance is 8 m at the maximum.
• Do not let the remote controller drop or fling it at will. Do not let any liquid in the
remote controller. Do not expose the remote controller directly to the sunlight or
excessive heat.
• If the remote controller does not function normally, remove the batteries for
30 seconds before reinstalling them. If that doesn't work, replace the batteries.
• When replacing the batteries, do not mix the new batteries with old ones or mix
batteries of different types, which could cause failure of the remote controller.
• If the remote controller is not to be used for a long period of time, remove the
batteries first, lest the leakage from them may damage the remote controller.
• Properly dispose the discarded batteries.
Note: This is a universal remote controller which provides all the function buttons.
Please understand that some of the buttons may not function, depending on the
specific air conditioner you have purchased. (If a specific function is not available on
the air conditioner, pressing the corresponding button will simply have no respond.)
HEAT and ELE.H functions are not available for cool only models, thus these two
buttons do not work correspondingly.
1
Slide to open the cover
according to the direction
indicated by the arrowhead.
Fix batteries
2
Insert two brand new batteries
(type AAA), and position the
batteries to the right electric
poles (+/-).
3
Put back the cover according
to the direction indicated by the
arrowhead.
EN
75