Bosch 0 275 007 031 Notice Originale page 38

Masquer les pouces Voir aussi pour 0 275 007 031:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
English–10
Code
Cause
510
Internal sensor error
511
Internal error of the drive unit
530
Battery pack error
531
Configuration error
540
Temperature error
550
An improper load was detected.
602
Internal battery pack error while
charging
602
Internal battery pack error
603
Internal battery pack error
605
Battery pack temperature error
605
Battery pack temperature error while
charging
606
External battery pack error
610
Battery pack voltage error
620
Charging error
640
Internal battery pack error
655
Multiple battery pack errors
656
Software version error
No display
Internal error of the on-board computer Restart your eBike system by switching it off and back on.
0 276 001 SPN | (19.2.15)
Corrective Measure
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Switch off the eBike, remove the eBike battery pack and reinsert the
eBike battery pack. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
The eBike is outside of the permissible temperature range. Switch off the
eBike system and allow the drive unit to either cool down or heat up to
the permissible temperature. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
Remove load. Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Unplug the charger from the battery pack. Restart the eBike system.
Plug the charger into the battery pack. If the problem persists, contact
your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
The eBike is outside of the permissible temperature range. Switch off
the eBike system and allow the drive unit to either cool down or heat
up to the permissible temperature. Restart the system. If the problem
persists, contact your Bosch eBike dealer.
Unplug the charger from the battery pack. Allow the battery pack to cool.
If the problem persists, contact your Bosch eBike dealer.
Check the wiring. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Replace the charger. Contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
Switch off the eBike system. Remove the battery pack and reinsert it. Re-
start the system. If the problem persists, contact your Bosch eBike deal-
er.
Contact your Bosch eBike dealer so that he can perform a software update.
Bosch eBike Systems

Publicité

Table des Matières
loading

Table des Matières