Printer Parts - Epson TM-J8000 Manuel D'utilisation

Printer Parts

1
printer cover
2
control panel
DIP Switch Tables
Serial interface
SW Function
1-1 Data receive error
1-2 Receive buffer capacity
1-3 Handshaking
1-4 Data word length
1-5 Parity check
1-6 Parity selection
1-7, 1-8 Transmission speed (see table at right)
SW Function
2-1 Handshaking (BUSY)
2-2 Customer display connection
2-3 Head rank
2-4 Power switch setting
2-5 IM connection
2-6 Internal use
2-7 I/F pin 6 reset
2-8 I/F pin 25 reset
Parallel interface
SW Function
1-1 Auto line feed
1-2 Receive buffer capacity
1-3 ~ 1-8 Undefined
SW Function
2-1 Handshaking.
2-2 Internal use. Do not change.
2-3 Head rank switching.
2-4 Power switch setting.
2-5 IM connection.
2-6 Reserved. Do not change
2-7 Not used for parallel interface.
2-8 I/F pin 31 reset. Do not change.
3
ink cartridge cover
ON OFF
Ignored Prints '?'
45 bytes 4KB
XON/XOFF DTR/DSR
7 bits 8 bits
Enabled Disabled
Even Odd
ON
Receive buffer full
Connected
Rank B
Fixing mode
Connected
—
Enabled
Enabled
ON
Always enabled
45 bytes
—
ON
Receive buffer full or
reading data
—
Rank B
Fixing mode
Connected
—
—
Fixed to ON.
4
roll paper cover
A
Transmission speed
Speed 1-7 1-8
2400 ON ON
4800 OFF ON
9600 ON OFF
19200 OFF OFF
OFF
Offline or receive buffer full
Not connected
Rank A
Normal
Not connected
Fixed
Disabled
Disabled
OFF
Always disabled
4KB
—
OFF
Offline, receive buffer full, or
reading data
Fixed to OFF.
Rank A
Normal
Not connected
Fixed to OFF.
Fixed to OFF.
—