Epson TM-J8000 Manuel D'utilisation page 12

English
TM-J8000 specifications
Print method Serial ink jet matrix method
360 × 360 dpi [dpi: dots per 25.4 mm (dots per inch)]
Dot density
Print direction Bidirectional with logic seeking
Paper feed method Friction feed
Head control Fine and economy
Print fonts Font A (default)/font B/extended font A:
Columns Receipt
Slip
1.48 × 3.32/1.20 × 2.47/2.47 × 3.32 mm {0.058 × 0.131"/0.047 × 0.097"/0.097 × 0.131"} (W × H)
Character size
Character sets 95 alphanumeric, 32 international characters
128 × 9 pages extended graphic characters, 16 extended font A characters
Ink cartridge SJIC1 (black ink)
specification
Print speed
Receipt
Slip
lps: lines per second; cpl: characters per line
Paper feed speed Receipt or slip — 35.3 ms/line using a 4.23 mm {1/6"} line pitch
120 mm/s {approximately 4.7"/s} (28.3 lines/second) when continuous paper feed
Line spacing 4.23 mm {1/6"}; programmable by control command, default
Paper roll Width:
(single-ply) Maximum outside diameter:
Paper roll spool inside diameter: 10 mm {0.39"} or more
68 – 215.9 mm × 68 – 297 mm {2.7 – 8.5 × 2.7 – 11.7"} (W × L). Normal, single-ply only.
Slip paper
Total slip thickness 0.09 to 0.15 mm {0.0035 to 0.0059"}
DKD function 2 drives
DM connection Display connection available only for a serial interface model printer
Interfaces RS-232, RS-485, or IEEE 1284
Buffer size Receive
Macro
Supply voltage AC85 V – 264.5 V (only for single phase); built-in universal power supply
Current 25 W (operating)
consumption
Reliability Receipt mechanism: 10 million lines
Slip mechanism:
Print head:
Temperature and Printing:
humidity Standby:
Storage:
200 × 325 × 300 mm {7.9 × 12.8 × 11.8"} (H × W × D)
Dimensions
Weight (mass) 9 kg {19.8 lb}
10 TM-J8000 User's Manual
Font A/font B/extended font A:
Font A/font B/extended font A:
Head control Font A
method 20 cpl
Fine 11.8 lps
Economy 12.6 lps
Head control Font A
method 65 cpl
Fine 6.8 lps
Economy 7.8 lps
45 bytes or 4KB, set with DIP switch
2KB
5 million lines
800 million dots/nozzle
10° to 35°C {50° to 95°F}, 20 - 80% RH (non-condensing)
5° to 40°C {41° to 104°F}, 20 - 80% RH (non-condensing)
–20° to 60°C {–4° to 140°F}, 5 - 85% RH (packed without ink)
–20° to 40°C {–4° to 104°F}, 20 - 85% RH (packed with ink)
22 × 48/18 × 36/36 × 48,
42/51/25
38-130/46-158/23-79
Font B Extended
25 cpl Font A 12 cpl
16.9 lps 11.8 lps
18.1 lps —
Font B Extended
80 cpl Font A 40 cpl
10.0 lps 6.8 lps
11.3 lps —
76 mm ± 0.5 mm {2.99" ± 0.02"}
83 mm {3.27"} or less
User-defined receipt: 12KB; slip: 5KB
Autocutter:
MTBF:
MCBF:
including spacing on the right
Font A Font B Extended
42 cpl 51 cpl Font A 25 cpl
9.0 lps 13.1 lps 9.0 lps
10.1 lps 14.7 lps —
Font A Font B Extended
130 cpl 158 cpl Font A 79 cpl
4.2 lps 6.2 lps 4.2 lps
4.9 lps 7.3 —
Paper must not be pasted to the spool.
2 million cuts
180,000 hours
29 million lines