Symbols And Icons; Symbols In The Manual; Symbols On The Device - Grizzly AKHS 18-45 2in1 Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
Battery (Li-Ion) ............... SDGJ-BP-18Li
Nominal voltage (U
Capacity (C) ................................... 2.0 Ah
Energy (E) ...................................... 36 Wh
Charger ........................DKYC2100470G
Voltage input 1 00-240 V~, 50-60 Hz, 0,3 A
Voltage output .................... 21 V
Protection class ..................................
Protection category ........................... IP20
Charging time ........................... appr. 3 - h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity. Technical and optical changes
may be undertaken in the course of further
development without notice. All dimen-
sions, references and information in this
instruction manual are therefore not guar-
anteed. Legal claims made on the basis of
the instruction manual can therefore not
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may diff er during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used. Safe-
ty precautions aimed at protecting
the user should be based on esti-
mated exposure under actual us-
age conditions (all parts of the op-
erating cycle are to be considered,
including, for example, times during
which the power tool is turned off
and times when the tool is turned
on but is running idle).
) ................. 18 V
max
0.47A

Symbols and icons

Symbols in the manual

Warning symbols with information
on damage and injury prevention.
Hazard symbol with information
II
on the prevention of personal
injury caused by electric shock.
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage.
Help symbols with information on
improving tool handling.

Symbols on the device

Make yourself familiar with all
control elements before any work.
Practice handling the saw and have
explained the functions, operating
methods and cutting techniques by
a practiced user or specialist.
Carefully read these operating in-
structions.
Do not expose the device to mois-
ture.
Danger due to materials blown out
of machine!
Keep the equipment away from
nearby people.
Caution! Falling objects. Particu-
larly when cutting overhead.
Caution! Risk of injury from blades
in operation.
GB
75

Publicité

Table des Matières
loading

Table des Matières