Kärcher Tornado BR Trike Notice D'installation page 13

English
Setting the water flow rate
n Set the maximum water flow rate with
the control knob.
n Control the water flow rate by
depressing the metering pedal.
Simultaneous depression of the drive
and metering pedals ensures that
metering is speed-dependent.
Information:
i
The surface must be cleaned several
times depending on the degree of dirt.
Lowering the suction bar
n Unlock the suction bar pedal by gently
pushing it to the right.
The suction bar is lowered and the
suction motor switches on.
Operating Instructions BR/BD Trike
Caution!
To clean tiled floors, adjust the
straight suction bar so that it is not at right
angles to the crevices. When the dirty-
water tank is full, the suction turbine
automatically switches off.
Information:
i
To improve the vacuuming result,
the suction bar can be rotated or tilted
(see "Setting the suction bar").
Switching on the brush head
Caution!
To prevent damage to the floor, do
not operate the unit on the spot.
n Depress the pedal and unlock by
simultaneously tilting it forwards;
the cleaning head is lowered and the
brush motor starts automatically.
n Adjust the brush contact pressure with
the star knob.
13