Cleaning And Maintenance - Beurer FM 90 Mode D'emploi

Step 5: Set the intensity
For the air pressure massage, the foot massager has three
intensity levels (low, medium, high). Select your desired in-
tensity level using the intensity button
LED green = low intensity
LED blue = medium intensity
LED red = high intensity
Step 6: Switch the heat on/off
The foot massager has an optional heat function. You can
warm your feet during the massage by using the heat func-
tion.
• To switch on the heat function, press the heat button
during the massage. The LED on the heat button begins
to light up red. Press the heat button again to switch off
the heat function. The LED on the heat button goes out.
Step 7: Stop the foot massage
• If, during use, you experience an excessive or unpleas-
ant feeling of pressure, press the start/stop button to
stop the treatment. To start the foot massager again,
press the ON/OFF button
Step 8: Switch off the foot massager
• To switch off the foot massager, press the ON/OFF
button when the device is switched on. The LED on
the ON/OFF button

8. Cleaning and maintenance

Cleaning the foot massager
WARNING
• Unplug the foot massager each time before cleaning.
• Clean the foot massager using only the methods specified. Under no circumstances may
liquid enter the foot massager or the accessories.
• Clean the foot massager with a slightly damp cloth. If it is very dirty, you can also moisten
the cloth with a mild soapy solution.
.
.
goes out.
20