Hoover HWCB 15 Mode D'emploi page 76

a) Use a warm damp cloth and manipulate the seal until it does adhere to the
cabinet properly, all the way around the door.
or
b) Use a hair dryer on its lowest heat setting and lightly heat the areas of the
door seal that are not adhering correctly. The heat will make the seal more
pliable and this will allow you to manipulate the seal into the correct position.
IMPORTANT: DO NOT HEAT THE DOOR SEAL ON ANYTHING BUT THE LOWEST
HEAT SETTING, OR HEAT THE SEAL FOR A LONG PERIOD OF TIME. OTHERWISE
DAMAGE MAY BE CAUSED TO THE DOOR SEAL, WHICH WOULD NOT BE
RECTIFIED UNDER THE GUARANTEE FREE OF CHARGE.
IMPORTANT: WHEN YOU HAVE REVERSED THE DOOR OF THE APPLIANCE,
IF YOU HAVE PLACED THE APPLIANCE ON ITS BACK, YOU MUST WAIT FOR
8 HOURS BEFORE SWITCHING THE APPLIANCE BACK ON.
.33.