Hoover HWCB 15 Mode D'emploi page 75

o Insert the Pivot Hinge into the Left Lower Hinge hole of the door.
o Install the door to the left hinge side by tightening the Support Rod with the
2 screws.
Pivot Hinge
Screws
IMPORTANT: Check that the door opens and shuts correctly, without fouling,
after you have completed the door reversal process.
After the door has been reversed, you should check the door seal of the Wine
Coolers. The seal should not be creased or crushed; otherwise there will be a
gap between it and the inside of the door.
o The seal must adhere properly all the way around the door.
o If the seal is not adhering to the cabinet properly, then you should either:-
.32.