Hoover HWCB 15 Mode D'emploi page 68

 Install Removable Front Grille (Option)
1.
The Front Grille is packed as accessary, pls.unpack and remove it from cabinet inside.
Place the unit on a soft and flat floor, lay it down to a suitable angle;
2.
Install the Front Grille by screwing the 4 Tapping Screws (ST4.2x10) tightly with a
phillips screwdriver;
3.
The unit with the Front Grille installed.
Warning: The Front Grille is not a supporter, to avoid it twisted,
pls.never try to lay the unit down on the foot of the Front Grille.
A· Removable Front Grille
A·Tapping Screws (4pcs, ST4.2x10)
.25.