Safety; Explanation Of Symbols; Intended Use - WIKA SB15 Mode D'emploi

3. Safety

3. Safety

3.1 Explanation of symbols

WARNING!
... indicates a potentially dangerous situation that can result in serious injury
or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or
damage to property or the environment, if not avoided.
DANGER!
... identifies hazards caused by electrical power. Should the safety
instructions not be observed, there is a risk of serious or fatal injury.
WARNING!
... indicates a potentially dangerous situation that can result in burns, caused
by hot surfaces or liquids, if not avoided.
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.

3.2 Intended use

The safety temperature limiters/monitors are universally applicable instruments. The safety
temperature monitor is used for monitoring plants. It switches the plant off when a preset
temperature is exceeded. In the event of a fault, the safety temperature limiter puts a plant
into a safe operating condition.
Both versions can be used with the media water, oil and gas. The measuring line
decouples the display from the measuring point. The direct ambient temperature which
affects the case must not be outside the range of 0 ... 60 °C. This leads to measuring errors
which have an effect on the display of the actual value and the switch behaviour.
These instruments are not approved for use in hazardous areas!
WIKA operating instructions models SB15, SW15
EN
7