Veripart VPVR144NF Mode D'emploi page 48

5. Power-on delay
In order to protect the freezer compressor from being damaged in
the case of short-time power failure (i.e., less than 5 minutes), the
compressor will not be started immediately after it is powered on.
6. Defrosting
The freezer can be defrosted automatically or manually.
If the freezer is not defrosting, the automatic defrosting program can
be enabled by holding down the SET key for 15 seconds, with all the
mode indicator lights illuminated. Refrigeration will be stopped, and
the defrosting process started. During the defrosting process, you can
hold down the SET key for 3 seconds to manually stop defrosting, or
wait until the defrosting program finishes.
In order to avoid frequent defrosting of the freezer, do not access the
defrost function during the defrosting process; and make sure not to
enable the defrost function again within 10 minutes after it is
manually disabled.
7. Fault alarm
When the alarm indicator keeps flashing (with the corresponding
indicator light of "-16, -20, -24, or fast freezing" flickering
simultaneously), it indicates a fault with the freezer. Please contact the
seller in such a case.
47