Functions - Veripart VPVR144NF Mode D'emploi

FUNCTIONS

When the freezer system is connected to the power supply for the first time, all
icons on the display panel will be illuminated for 2 seconds, and the system
will be set at -18°C by default.
Functions
1. Temperature setting
The temperature can be adjusted by pressing the 'SET' key. Every time
the "SET" key is pressed, the current mode indicator lights go off and
the next mode indicator lights up, with the said mode setting validated
if there is no key operation within 5 seconds (otherwise, the mode
setting will be invalid). After the setting takes effect, the temperature
will be immediately controlled as per the mode setting.
The temperature modes cycle as follows:
„-16°C > -18°C > -20°C > -22°C > -24°C >
2. Fast freezing
When the fast-freezing function is enabled, the compartment
temperature can be cooled rapidly, which is beneficial for the
preservation of the food's nutrition and freshness.
After a cumulative running period of 26 hours, the fast-freezing
function will stop automatically, with the temperature mode restored to
that set before the fast-freezing function was enabled.
3. Door open alarm
When the freezer door remains open for more than 3 minutes, the
buzzer will sound. The alarm can be suspended for 3 minutes by
pressing any key but it will not stop until the door is properly closed.
4. Power-cut memory
In case of power failure, the freezer will return to its operating state
before the power failure once the power supply is restored.
46
> -16°C"